Print This Page
Brand:
IAQ
Located in:
Air Filters, Pleated Panel Filters, 1" Pleated, MERV 11
10" X 24" X 1" MERV 11 Pleated Filter *Listed filter size is nominal. Actual filter size is up to ½" less on all dimensions. Better filtration is the first step in improving Indoor Air Quality. Pleated Panel Filters outperform ordinary furnace filters with higher efficiency and lower pressure drop allowing air-handling systems to stay cleaner and operate more efficiently. We achieve this with 100% synthetic electrostatically charged gradient density media, optimum pleat spacing and high initial and sustained efficiency, high dust holding capacity and very low pressure drop. The media is resistant to a wide range of chemicals, does not absorb moisture and will not support microbial growth Benefits: -Catches and holds more pollen, dust, dirt, etc. than standard pads or panel type HVAC filters creating a healthier IAQ (Indoor Air Quality)environment. -Medium efficiency filtration protects expensive HVAC equipment from the effect of dirty air and significantly reduces costly building maintenance. -Extends life of more expensive secondary filters (RIGID, CELLS, HEPAS, BAGS, etc.) -Can last up to four times the life of standard pads or panel type filters thereby drastically reduces material and maintenance and labor costs. Specifications: -Air filters are pleated media type. -The filter media consists of 100% synthetic electrostatically charged thermally bonded fibers with no chemical binders. -The media is continuously bonded to a 30 guage galvanized, corrosion resistant, expanded metal support grid with an effective open areaof 96%. -The media is pleated to maximize surface area and dust holding and minimize airflow resistance. -The enclosure frames are constructed of high wet strength, moisture resistant beverage board. -Diagonal support members of the frame are bonded to the air entering and exit apexes of each pleat to prevent pleat collapse and filter bowling. -The inside periphery of the enclosing frame is completely bonded to the outer edges of the filter media to prevent bypass. -The air filters are listed and rated by Underwriters Laboratory as UL class 2 and have a maximum teperature rating of 180 degrees Farenheit. Application: Residential & Commercial Furnace and Air Conditioning Brand: "unbranded" Kimberly Clark Filtration Media Change 4-6x per year or as needed.
[1 of 1 customers found this review helpful]
Good Filters
By Eli
from Austin, TX on 9/25/2009
from Austin, TX on 9/25/2009
Bottom Line:
Comments about IAQ 10" X 24" X 1" MERV 11 Pleated Filter:
I've only had them a few weeks and they are replacing some old, very cheap ones, but these new filters seem to work well. My house gets very dusty, very quick, especially since we haven't had much rain this year, and the filters are already very dusty too so I'm guessing they're doing their job. I haven't noticed any loss of efficiency issues. They have a good feel, thick and well made. I would buy again.